OREGON 75CL (3/8" X .063) SQUARE CHISEL FULL COMP CHAIN
Part Number:
75CL072G
CUSTOM LOOP SIZES AVAILABLE. Contact us at 206-973-7212 or hello@westcoastsaw.com.
Oregon 75CL is part of the PowerCut product line of professional chainsaw chains.
75CL is a square ground chisel chain in the standard (full comp) sequence. This chain is similar to standard chisel chain, but the grind on the cutter is angled, which makes it the fastest cutting chain available today. This chain is primarily used for falling big softwood trees on the west coast, but many professional cutters use this chain in the eastern hardwood forests also. This chain is designed to cut in clean, green wood, and any dirt or mud will dull it quickly.
The square ground cutter design can be sharpened with a 3-Corner or double beveled file, but it is very difficult without the use of a guide. Most users sharpen this chain with a chisel chain grinder. Like most Oregon chainsaw chain this style has the LubriTec oiling system to help keep both the bar and chain well lubricated.
CUSTOM LOOP SIZES AVAILABLE. Contact us at 206-973-7212 or hello@westcoastsaw.com.
Oregon 75CL is part of the PowerCut product line of professional chainsaw chains.
75CL is a square ground chisel chain in the standard (full comp) sequence. This chain is similar to standard chisel chain, but the grind on the cutter is angled, which makes it the fastest cutting chain available today. This chain is primarily used for falling big softwood trees on the west coast, but many professional cutters use this chain in the eastern hardwood forests also. This chain is designed to cut in clean, green wood, and any dirt or mud will dull it quickly.
The square ground cutter design can be sharpened with a 3-Corner or double beveled file, but it is very difficult without the use of a guide. Most users sharpen this chain with a chisel chain grinder. Like most Oregon chainsaw chain this style has the LubriTec oiling system to help keep both the bar and chain well lubricated.
| Pitch | 3/8" (.375") |
|---|---|
| Gauge | .063" (1.6mm) |
| Cutter Type | Square Chisel |
| Sequence | Standard |
| Recommended Saw Sizes | 3.0-6.0 cubic inches (50-100cc) |
| Kickback Reduction Features | None |
| ANSI Approved Low Kickback Chain | No |
WARNING:This saw chain may be capable of kickback that could result in serious injury to the chainsaw operator or bystanders. Do not use this chain unless you have experience and specialized training for dealing with kickback. Saw chain with reduced kickback potential is available.
